Over the this week, it’s been all about kitchens and bathrooms, and this will continue over the weekend. The weather has taken a turn towards the cold, and the old house is so much colder than the passive house, so we are looking to move in as soon as possible.
The main kitchen business was to cut and fit the Paperstone countertops. Paperstone is a pretty amazing eco-product. It’s made of a mixture of recycled paper and resins, which is laid down in thin layers and then compressed. It ends up like something that is strangely not unlike slate, and although you can get it in an increasingly large range of colours, we decided that the most slate-like colour of all was the one we wanted – and we managed to get exactly what we needed from their outlet site, Green Countertops Direct. It has a lot of advantages over other composite countertops, particularly because it’s the same consistency and colour all the way through, so you can cut it rout out whatever you like and so on. It is, however, very, very hard and even using the recommended carbide drill and router bits, it still ate two router bits and a special jigsaw bit that was supposed to be capable of cutting through thick steel.
It’s all installed now, and this weekend we’ll be sanding, oiling and polishing it ready for use.
The other, related, job was to put together the kitchen island, which we made using the left-ever cross-laminated timber (CLT) we had. I thought this might look over-heavy but it doesn’t, it looks industrial but really great and is a nice reminder of how the house is put together and was made. For now, we’ve even left the lifting straps on, although we may cut those off eventually as we decide what to put under the island. The island is deliberately about two inches lower than the main surfaces in the kitchen, so it’s the right height for kneading bread, making pastry etc.